This Galil style black aluminum stock is only 7-1/5" long and lightweight. Includes an extension tube, sling swivel, foam over tube, and a 1/2" recoil pad. The sling swivel can be relocated to any of four different locations. (photos shows it on lower rear) The stock has been machined to fit with our rear AR threaded stock adapter designed only for the AK Yugo PAP M92. We include a longer, full length grip bolt that fits with the stock grip and most longer grip bolt AK custom grips.*NEW GRIP MOUNT BLOCK ON UNDERSIDE OF ADAPTER** **If you need a longer "short bolt" for an aftermarket grip, ask for one in the comments section at the end of your order, we will NOT supply both bolts. Please call with any questions.

*Our new AR stock adapter makes it easy to add an AR stock to your M92 using our adapter between the grip and the receiver. Any buffer tube type AR stock will thread into the adapter, both commercial and Mil spec can be used. The longer, full length grip is standard with most PAP M92 guns and fits with our adapter. **NEW GRIP MOUNT BLOCK ON UNDERSIDE OF ADAPTER** This part number for the Adapter only, other parts sold separately. **If you need a longer "short bolt" for an aftermarket grip, ask for one in the comments section at the end of your order, we will NOT supply both bolts

This light weight fake suppressor looks and weighs similar to the real thing. 6.5" inches in length, and 1.5" in diameter, threaded 26mm x 1.5 LH, machined in high quality aluminum, knurled at the rear, and finished in our new Flat/Matte jet black anodize. Adds a tactical look to any tricked out AK-47/Yugo PAP M92. (gun & other components sold separately) Weighs about 13 oz*

Our new AR stock adapter makes it easy to mount this two bolt style rear skeleton stock between the grip and the receiver. This skeleton stock is lightweight and offers a rear rubber butt pad. We include a longer, full length grip bolt that fits with the stock grip and most longer grip bolt AK custom grips.**NEW GRIP MOUNT BLOCK ON UNDERSIDE OF ADAPTER** **If you need a longer "short bolt" for an aftermarket grip, ask for one in the comments section at the end of your order, we will NOT supply both bolts. Please call with any questions.

Our new AR stock adapter makes it easy to add a two bolt style (ACE) stock, Choate stock or our modular, custom billet rear stock to your M92, using our adapter between the grip and the receiver. Two threaded holes have 10/32 threads. The longer, full length grip is standard with most Draco guns and fits with our adapter. This part number for the FLAT MOUNT ADAPTER ONLY, Rear stock & other parts sold separately. This rear stock can be found in our REAR BUTT STOCKS section ***We also include a longer grip bolt.**If you need a longer "short bolt" for an aftermarket grip, ask for one in the comments section at the end of your order, we will NOT supply both bolts.**NEW GRIP MOUNT BLOCK ON UNDERSIDE OF ADAPTER**

This is our newest stock adapter with a folder adapter and a tactical skeleton rear stock for the YUGO PAP M92. Our adapter is easy to mount between the grip and the receiver using a longer bolt (included) and the adapter can be set up to fold to the right or the left.**NEW GRIP MOUNT BLOCK ON UNDERSIDE OF ADAPTER****From the front of the adapter to the end of the stock it measures about 8.75" in length* If you need a longer "short bolt" for an aftermarket grip, ask for one in the comments section at the end of your order, we will NOT supply both bolts.

Our new Spiked muzzle brake for the Yugo M92 is made of machined steel and finished in black oxide for durability. It has six large machined, slotted ports, six smaller ports and its' crown works great for door breach situations, self defense and adds a custom appearance to any tactical Yugo M92 or similar AK with the large M26 x1.5 mm LH threads. It is 3" inches in length and weighs only 4.5 ounces. It has a thread of M26 x 1.5mm LH. (gun & other parts sold separately)

Our new Spiked muzzle brake for the Yugo M92 is made of machined steel and finished in black oxide for durability and this version has a locking notch for a detent pin. It has six large machined, slotted ports, six smaller ports and its' crown works great for door breach situations, self defense and adds a custom appearance to any tactical Yugo M92 or similar AK with the large M26 x1.5 mm LH threads. It is 3" inches in length and weighs only 4.5 ounces. It has a thread of M26 x 1.5mm LH with a locking detent machined notch. (gun & other parts sold separately)

Our new AR stock adapter makes it easy to mount our own tactical billet stock between the grip and the receiver. This tactical stock is 8.5" in length, weighs about 15 ounces, offers a slim rear slot for a sling and has a durable flat/matte black finish. **NEW GRIP MOUNT BLOCK ON UNDERSIDE OF ADAPTER**We include a longer, full length grip bolt that fits with the stock grip and most longer grip bolt AK custom grips. **If you need a longer "short bolt" for an aftermarket grip, ask for one in the comments section at the end of your order, we will NOT supply both bolts.

This package includes our Rear Stock Adapter, AR/Tube Folding Adapter, longer bolt, and an Adjustable 6 Position Rear Stock. The adapter can be positioned to fold to the left or the right and works with your OEM AK grip or aftermarket type AK grips. *NEW GRIP MOUNT BLOCK ON UNDERSIDE OF ADAPTER**Mounting instructions included, no drilling or welding. *Measures from 10" up to 13.75" fully extended. Please call with any questions.

Our new AR stock adapter & 6 Position AR Stock fits between the stock grip and the receiver. It is easy to install using the stock grip bolt. The longer, full length grip is standard with most AK/Yugo M92 guns and fits with our adapter. Please call with any questions. ***We also include a longer grip bolt(not shown)

This AK full length detent bearing pin and spring is easy to install and adds a standard AK locking pin to secure most muzzle brakes with a locking notch.