SAVE some money and buy this Mac-10 rear stock combination! This is the perfect set up if you want the feel of a 4 position adjustable AR stock and the strength of our new fixed stock bracket. It bolts to your gun using the existing holes from the wire stock and the stock latch plunger. It will not wiggle out during fire and has a tight precision fit. The addition of the AR stock will greatly improve accuracy and shot grouping as it provides a firm shoulder rest and helps to balance the weapon. Upgrade your MAC today and save some money! This part number for SMG only, does not fit Semi Auto guns. Installation instructions & allen wrench included.

SAVE some money and buy this Mac-10 rear stock combination! This is the perfect set up if you want the feel and length of a 6 position adjustable AR stock and the strength of our new fixed stock bracket. It bolts to your gun using the existing holes from the wire stock and the stock latch plunger. It will not wiggle out during fire and has a tight precision fit. The addition of the AR stock will greatly improve accuracy and shot grouping as it provides a firm shoulder rest and helps to balance the weapon. Upgrade your MAC today and save some money! This part number for SMG only, does not fit Semi Auto guns. Installation instructions & allen wrench included.

This machined 7 inch Barrel extension takes its looks from the Browning 1919 machine gun barrel. It is threaded for the Mac-10 .45 acp SMG and Semi Auto and provides more accuracy and gives your weapon a more tactical look. It also acts as a counter weight and aids to keep the muzzle down under rapid fire in both an SMG and Semi Auto.With 9 machined ports at the end, it acts as a muzzle break as well. Fits standard 7/8 x 9 threaded barrels for Mac-10 SMG, MPA .45 acp, and Vulcan .45 acp guns. It's a great upgrade that works well with our forward tactical grips. (gun & other parts sold separately)

This newly designed solid billet tactical grip is the perfect replacement for the standard strap. Our new design offers a tactical forearm position giving the shooter more control under rapid fire and increased target acquisition. It is hard coat anodized and well constructed from top to bottom in a one piece design with a knurled textured grip. In an anodized black finish, it works with stock uppers and most after market uppers as well. Its thin design allows the entire barrel thread for most suppressors and muzzle breaks and is flush to the exterior barrel base. Easy installation with a clamp design for strength and a set screw for a tight fit. Allen wrench included. Fits standard 7/8x9 & 3/4 x 10 threaded barrels for Mac-10, MPA .45 acp & Vulcan .45 acp series. Please call if you have any questions. Addition of this item to a semi auto gun may require additional paperwork to be filed with the ATF, check with your local dealers. (gun and other components sold separately)

This NEW forward Mount for the Mac-10 .45 acp, 9mm & MPA .45 acp has three short rails to add any components you want. You can add a lower grip, a laser on the sides, a flashlight or other components. You can also add grip covers to all three rails to give it a soft tactical grip. Our new mount fits over the barrel and has a thickness equal to the exterior base of the barrel allowing all the barrel threads to be used for a suppressor, muzzle brake, flash hider, our Blackout Barrel Extension. The mount is held around the barrel by 3 set screws and allows access to the receiver pins. Finished in jet black anodize. Includes mount, allen wrench, and three polymer rails. (gun, grip & other parts sold separately)

If you are looking for a forward mount to attach a grip to your Mac-10 and you also want a sling loop, this is the perfect upgrade for you! This set up includes our new forward tri rail mount with a rail mounted sling loop to attach almost any sling. Easy installation, instructions and allen wrenches included. Fits all standard barreled MPA and Mac-10 .45 acp guns. (gun & other parts sold separately)

Finally, this is an easy way to add a sling to your MAC-10 & Master Piece Arms guns. Swap this machined forward pin sling swivel for your standard receiver pin and add a rear stock or rear sling loop and your favorite sling and that's it! It offers a wide sling swivel and a locking clip to prevent it from sliding out of place. Finished in a dark parkerized coat to prevent rust and match your tactical firearm. (gun & other parts sold separately)

This Mac-10 .45 acp competition upper system comes complete with side cocking upper with rail for optics, extended rifled barrel, AR hand guards, and a tactical rail mount and fore grip. (muzzle brake sold separately) Just drop your bolt assembly in, lock into your lower and that's it. Everything you need to be a competitive shooter at the range. (gun & other components sold separately)**LIMITED AVAILABILITY-PLEASE CALL BEFORE ORDERING***

This machined flash suppressor and muzzle break is the perfect finish to any custom weapon. Three machined ports allow gases to escape when under fire and aids in keeping the muzzle down under sustained fire. It comes complete with a threaded lock ring and is finished in black oxide. Threaded 7/8x9, standard Mac-10 .45 acp.(gun & other parts sold separately)

If you want better accuracy, performance, and more a tactical looking Mac, this is the set up for you! This extended barreled upper comes complete with AR style hand guards, complete rifled barrel, and a side charging upper with a rail system for optics.(muzzle brake sold separately) Just slide in your bolt assembly, drop into your receiver, lock into place and its ready to go.(gun, muzzle brake & other components sold separately)***OUT OF STOCK-BACK ORDER ONLY***

This complete threaded barreled upper comes with side EZ cocker and new low Integral machined rail for optics. The side cocker makes it easier to pull back the bolt and accommodates lots of room on top of the scope rail for your optics of choice. The new low rail has a deep machined center that allows use of the iron sights. For use with a Mac-10 .45 acp and MPA 10 & 15 series guns. Please contact us if you have any questions.

This complete threaded barreled upper comes with side EZ cocker and Integral machined rail for optics. It also has a notched barrel throat (see photos #2 & 3) for guns that use the older style bolt and extractor. The side cocker makes it easier to pull back the bolt and accommodates lots of room on top of the scope rail for your optics of choice. For use with a Mac-10 .45 acp with older style bolt and extractor. Please contact us if you have any questions. (other components sold separately)