This semi auto hammer is a replacement for your worn out or damaged Cobray hammer. Fits semi auto M-11 Cobray guns only. (gun and other parts sold separately)

If you want better accuracy, performance, and more a tactical looking Mac or building a tactical rifle, this is the set up for you! This extended 16" barreled upper comes complete with Quad rail hand guards, complete rifled barrel, Ar-15 A1 muzzle brake (bored out for 9mm) and a side charging upper with a rail system for optics.(fore grip, grip rail, gun & other parts sold separately) Just slide in your bolt assembly, drop into your receiver, lock into place and its ready to go. Works with all MPA mid sized 9mm & M-11 9mm guns. * Does not fit MPA Mini* ***LIMITED AVAILABILITY-PLEASE CALL***

This machined, ported, 5" extended muzzle brake adds length and a tactical look to your custom gun. (gun & other parts sold separately) **BACK ORDER ONLY**

Labor Day weekend pricing! If you have been waiting for a way to attach an AR stock to your Cobray semi auto, this is for you! CNC cut, this two piece design is built from the same aluminum as most AR receivers. It has a custom designed inner rear spring spacer that replaces the OEM part. This allows the bracket to be bolted to the gun and improve strength. The adapter is finished is jet black anodize and comes complete with threaded insert, allen wrench and instructions on installation. Call for questions. (gun & other parts sold separately) NFA rules apply, Addition of this item may require additional paperwork to be filed with the ATF, check with your local dealers.

This machined 7 inch Barrel extension takes its looks from the Browning 1919 machine gun barrel. It is threaded for the M-11 9mm SMG and Semi Auto and provides more accuracy and gives your weapon a more tactical look. It also acts as a counter weight and aids to keep the muzzle down under rapid fire in both an SMG and Semi Auto.With 9 machined ports at the end, it acts as a muzzle break as well. Fits standard 3/4 x 10 threaded barrels for M-11 Semi Auto Cobray, this part will not fit MPA Mini with 1/2 x28 barrel. It is a great upgrade that works well with our forward tactical grip. (gun & other parts sold separately)

If you are having trouble with brass not ejecting properly and only a few rounds fire and then the bolt locks up, it may be time for a new extractor set. Tap out the old roll pin, set the new parts in place, tap in the new pin and extractor and you are ready to go! Call if any questions. Bolt assembly not included.

If you want to add a sling to your M-11 semi auto, this is the perfect and easy solution. It allows for an easy swivel attachment for a sling. If you need a swivel, please see our swivels in the same section. If using it on an MPA gun, you will need to drill out the rear threads on your gun as the hole is a bit too small. (swivel, gun & other parts sold separately)

f you want the versatility of a standard 3/4x10 9mm thread and also want a 1/2x28 thread, then this is the barrel for you. It offers machined 1/2x28 threads on a standard 9mm barrel so you can thread on suppressors and muzzle brakes. It is a new barrel with both threads. (Upper sold separately) Fits M-11 SMG, Semi Auto and MPA mid sized 9mm. ***Does not fit MPA Mini 930.***

This newly designed solid billet tactical grip is the perfect replacement for the standard strap. Our new design offers a tactical forearm position giving the shooter more control under rapid fire and increased target acquisition. It is hard coat anodized and well constructed from top to bottom in a one piece design with a knurled textured grip. In an anodized black finish, it works with stock uppers and most after market uppers as well. Its thin design allows the entire barrel thread for most suppressors and muzzle breaks and is flush to the exterior barrel base. Easy installation with a clamp design for strength and a set screw for a tight fit. Allen wrench included. Fits standard 3/4 x 10 & 1/2 x 28 threaded barrels for M-11 Semi Auto Cobray, MPA 9mm, 30, 35, & 930 series. Please call if you have any questions. NFA rules apply, Addition of this item to a semi auto gun may require additional paperwork to be filed with the ATF, check with your local dealers. (gun and other components sold separately)

This NEW forward Mount for the MPA mid sized M-11 pistol. It has three short rails to add any components you want. You can add a lower grip, a laser on the sides, a flashlight or other components. You can also add grip covers to all three rails to give it a soft tactical grip. Our new mount fits over the barrel and has a thickness equal to the exterior base of the barrel allowing all the barrel threads to be used for a suppressor, muzzle brake, flash hider, our Blackout Barrel Extension. The mount is held around the barrel by 3 set screws and allows access to the receiver pins. Finished in jet black anodize. Includes mount, allen wrench, and three polymer rails. ***Does NOT fit MPA mini 930 pistol****

Finally, this is an easy way to add a sling to your MPA 9mm, Mini 930, M-11 pistols and SMG guns. Swap this machined forward pin sling swivel for your standard receiver pin and add a rear stock or rear sling loop and your favorite sling and that's it! It offers a wide sling swivel and a locking clip to prevent it from sliding out of place. Finished in a dark parkerized coat to prevent rust and match your tactical firearm. (gun & other parts sold separately)

This is a replacement hammer pin for the Cobray Semi Auto M-11 9mm. Make sure you have the retaining clip to secure it in place. Other parts sold separately.